Skip to content
Can't connect to RDP after viscosity installation
Got a problem with Viscosity or need help? Ask here!
- Posts: 2
- Joined: Fri Jan 05, 2018 3:34 am
heyho!
I need to connect to an openVPN from an azure windows 2016 R2 virtual machine.
After the installation of viscosity v1.7 I can't connect anymore to the RDP and it seems that the vm has no network more.
knows anybody how I can fix this or what the reason for this issue is?
I need to connect to an openVPN from an azure windows 2016 R2 virtual machine.
After the installation of viscosity v1.7 I can't connect anymore to the RDP and it seems that the vm has no network more.
knows anybody how I can fix this or what the reason for this issue is?
Hi elweilando,
Please start with the following to try and determine what is causing the issue - http://sparklabs.com/support/kb/article ... connection
Regards,
Eric
Please start with the following to try and determine what is causing the issue - http://sparklabs.com/support/kb/article ... connection
Regards,
Eric
Eric Thorpe
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
- Posts: 2
- Joined: Fri Jan 05, 2018 3:34 am
ipconfig and routes are unchanged after installation. but if I restart the azure vm, I can't connect anymore to the azure vm.
I use now the openvpn-client (OpenVPN 2.4.4 -- released on 2017.09.26) and it works.
I use now the openvpn-client (OpenVPN 2.4.4 -- released on 2017.09.26) and it works.
Hi elweilando,
It sounds like you might have DNS misconfigured on your server, most likely Split DNS is forcing lookups across the VPN due to domains you are pushing, or your server does not know about your RDP DNS due to it being local and Viscosity is set to Full DNS. You can adjust your DNS on your server to correct this problem, or you can turn off this behaviour by setting the DNS Mode on the connection to Full DNS (Edit the connection and go to the Networking tab), and then going to Preferences -> Advanced and ticking "Use Windows DNS System for Full DNS".
http://sparklabs.com/support/kb/article ... #dns-modes
Regards,
Eric
It sounds like you might have DNS misconfigured on your server, most likely Split DNS is forcing lookups across the VPN due to domains you are pushing, or your server does not know about your RDP DNS due to it being local and Viscosity is set to Full DNS. You can adjust your DNS on your server to correct this problem, or you can turn off this behaviour by setting the DNS Mode on the connection to Full DNS (Edit the connection and go to the Networking tab), and then going to Preferences -> Advanced and ticking "Use Windows DNS System for Full DNS".
http://sparklabs.com/support/kb/article ... #dns-modes
Regards,
Eric
Eric Thorpe
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
Hi sullrich,
We've seen reports on Azure VMs that DHCP fails after additional non-azure adapters are installed, for some reason Azures DHCP service cannot handle more than one adapter on a VM, you will need to contact Azure for support about this. To get around this, you will need to set a static IP address on your default ethernet adapter.
Regards,
Eric
We've seen reports on Azure VMs that DHCP fails after additional non-azure adapters are installed, for some reason Azures DHCP service cannot handle more than one adapter on a VM, you will need to contact Azure for support about this. To get around this, you will need to set a static IP address on your default ethernet adapter.
Regards,
Eric
Eric Thorpe
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
7 posts
Page 1 of 1