Skip to content
Strange New IPV6 Warning
Got a problem with Viscosity or need help? Ask here!
Suddenly I am getting a new warning in my client side log:
WARNING: OpenVPN was configured to add an IPv6 route over utun6. However, no IPv6 has been configured for this interface, therefore the route installation may fail or may not work as expected.
This wasn't there before and I see no way to disable it....server is set to UDP IPv4
Thanks for any insight.
WARNING: OpenVPN was configured to add an IPv6 route over utun6. However, no IPv6 has been configured for this interface, therefore the route installation may fail or may not work as expected.
This wasn't there before and I see no way to disable it....server is set to UDP IPv4
Thanks for any insight.
Hi rdsmith24,
It sounds likely that your connection has the "Send all traffic over VPN connection" item selected for the "All Traffic" option (under the Networking tab when editing your connection). This will attempt to direct both IPv4 and IPv6 traffic through the VPN connection. The warnings you're receiving are harmless, however to get rid of them you can select the "Send all IPv4 traffic over VPN connection" option instead (or select Automatic and leave it to the server).
Cheers,
James
It sounds likely that your connection has the "Send all traffic over VPN connection" item selected for the "All Traffic" option (under the Networking tab when editing your connection). This will attempt to direct both IPv4 and IPv6 traffic through the VPN connection. The warnings you're receiving are harmless, however to get rid of them you can select the "Send all IPv4 traffic over VPN connection" option instead (or select Automatic and leave it to the server).
Cheers,
James
Web: https://www.sparklabs.com
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
Having the same issue. I tried the solution mentioned above but still receive the warning.
Settings:
Send all IPv4 traffic over VPN connection
Full DNS (Use VPN DNS for all traffic)
Does it matter what settings I have for IPv6 in Network Settings for my Ethernet connection? Or what settings I have on my router?
When I restarted the router and the connection went down I received this in the Viscosity log:
2022-01-01 21:16:43: WARNING: OpenVPN was configured to add an IPv6 route. However, no IPv6 has been configured for utun10, therefore the route installation may fail or may not work as expected.This is on macOS Catalina
2022-01-01 21:16:43: add_route_ipv6(2000::/3 -> :: metric -1) dev utun10
Settings:
Send all IPv4 traffic over VPN connection
Full DNS (Use VPN DNS for all traffic)
Does it matter what settings I have for IPv6 in Network Settings for my Ethernet connection? Or what settings I have on my router?
When I restarted the router and the connection went down I received this in the Viscosity log:
2022-01-01 21:16:16: write UDP: No route to host (code=65)
2022-01-01 21:16:16: State changed to Disconnecting (Manual)
2022-01-01 21:16:16: delete_route_ipv6(2000::/3)
2022-01-01 21:16:16: SIGTERM[hard,] received, process exiting
2022-01-01 21:16:16: State changed to Disconnected (Process Terminated)
2022-01-01 21:16:43: Viscosity Mac 1.10.1 (1586)
2022-01-01 21:16:43: Viscosity OpenVPN Engine Started
2022-01-01 21:16:43: Running on macOS 10.15.7
Hi jprokos,
Can you please post (or email to us if you'd prefer them not to be on a public forum) the details requested in the following article and we'll take a look at where the IPv6 route/s are coming from for you.
https://www.sparklabs.com/support/kb/ar ... ort-staff/
Cheers,
James
Can you please post (or email to us if you'd prefer them not to be on a public forum) the details requested in the following article and we'll take a look at where the IPv6 route/s are coming from for you.
https://www.sparklabs.com/support/kb/ar ... ort-staff/
Cheers,
James
Web: https://www.sparklabs.com
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
5 posts
Page 1 of 1