Multiple concurrent connections to two OpenVPN servers

Got a problem with Viscosity or need help? Ask here!

lbusuttil

Posts: 2
Joined: Sat Jan 30, 2021 3:03 am

Post by lbusuttil » Sat Jan 30, 2021 3:19 am
I have just installed Viscosity and imported two profiles from the OpenVPN clients.
I can connect to both connections if the other one is off however if I try to connect the second connection when the first one is connected I get an error. From the log I can see the following error:

TCP/UDP: Socket bind failed on local address [AF_INET6][undef]:1194

The office locations I am connecting two have two seperate network subnets which are different from the local one so that should not be a problem.

Any help in troubleshooting this?

I tried searching the forum but cannot find anything similar.

James

User avatar
Posts: 2101
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Sat Jan 30, 2021 8:32 am
Hi lbusuttil,

The problem is that both connections are set to bind to the same local port number. You should be able to edit both connections in Viscosity, and under the "Options" tab tick the "No Bind" option. You can then try connecting both connections simultaneously.

Cheers,
James
James Bekkema
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs

lbusuttil

Posts: 2
Joined: Sat Jan 30, 2021 3:03 am

Post by lbusuttil » Sat Jan 30, 2021 9:33 pm
Thanks this worked.
3 posts Page 1 of 1