Skip to content
Connection failed since 1.9
Got a problem with Viscosity or need help? Ask here!
- Posts: 2
- Joined: Thu Dec 31, 2020 6:54 pm
Hi,
I upgraded recently to 1.9 and I am not able to connect anymore.
On another workstation, I am still using v 1.8.5.1 and it woks as expected.
I also tried the last beta version, but the result is the same.
Here is the connection trace (some part in French):
déc. 31 9:07:12 : État changé en Connexion en cours
déc. 31 9:07:12 : Viscosity Windows 1.9.1 (1703) Beta7
déc. 31 9:07:12 : Exécution sur Windows 10 2004 (19041) 64 bit
déc. 31 9:07:12 : Exécution sur .NET Framework Version 4.8.04084.528372
déc. 31 9:07:12 : Checking reachability status of connection...
déc. 31 9:07:12 : Connection is reachable. Starting connection attempt.
déc. 31 9:07:12 : Mettre en place l’interface...
déc. 31 9:07:12 : There was a problem activing the interface, Viscosity will attempt to repair it. This process may take a minute or two.
déc. 31 9:07:12 : Please try the following if this problem persists: https://www.sparklabs.com/support/kb/ar ... s-windows/
déc. 31 9:07:12 : Options error: The command "tls-remote" or one of its parameters is invalid for this version of OpenVPN (2.4.10). Please edit the connection, make sure the command is valid, and try again.
déc. 31 9:07:12 : Full command: tls-remote VPN_Users
déc. 31 9:07:13 : The interface is now responding, proceeding with connection attempt.
OpenVPN n'a pas pu démarrer. Veuillez vérifier ces points:
- Tous messages au dessus de ce message.
- Assurez-vous que Viscosity ne fonctionne pas depuis un disque protégé par File Vault (Déplacez Viscosity dans le dossier Applications).
- Assurez-vous que la configuration est correcte. Vérifiez les paramètres de connexion en utilisant Viscosity et assurez-vous que tous les paramètres sont corrects.
déc. 31 9:07:14 : État changé en Déconnexion
déc. 31 9:07:14 : État changé en Déconnecté
Thank you by advance for your assistance,
I upgraded recently to 1.9 and I am not able to connect anymore.
On another workstation, I am still using v 1.8.5.1 and it woks as expected.
I also tried the last beta version, but the result is the same.
Here is the connection trace (some part in French):
déc. 31 9:07:12 : État changé en Connexion en cours
déc. 31 9:07:12 : Viscosity Windows 1.9.1 (1703) Beta7
déc. 31 9:07:12 : Exécution sur Windows 10 2004 (19041) 64 bit
déc. 31 9:07:12 : Exécution sur .NET Framework Version 4.8.04084.528372
déc. 31 9:07:12 : Checking reachability status of connection...
déc. 31 9:07:12 : Connection is reachable. Starting connection attempt.
déc. 31 9:07:12 : Mettre en place l’interface...
déc. 31 9:07:12 : There was a problem activing the interface, Viscosity will attempt to repair it. This process may take a minute or two.
déc. 31 9:07:12 : Please try the following if this problem persists: https://www.sparklabs.com/support/kb/ar ... s-windows/
déc. 31 9:07:12 : Options error: The command "tls-remote" or one of its parameters is invalid for this version of OpenVPN (2.4.10). Please edit the connection, make sure the command is valid, and try again.
déc. 31 9:07:12 : Full command: tls-remote VPN_Users
déc. 31 9:07:13 : The interface is now responding, proceeding with connection attempt.
OpenVPN n'a pas pu démarrer. Veuillez vérifier ces points:
- Tous messages au dessus de ce message.
- Assurez-vous que Viscosity ne fonctionne pas depuis un disque protégé par File Vault (Déplacez Viscosity dans le dossier Applications).
- Assurez-vous que la configuration est correcte. Vérifiez les paramètres de connexion en utilisant Viscosity et assurez-vous que tous les paramètres sont corrects.
déc. 31 9:07:14 : État changé en Déconnexion
déc. 31 9:07:14 : État changé en Déconnecté
Thank you by advance for your assistance,
Hi xverwaerde,
It looks like you are using OpenVPN 2.3 on Viscosity 1.8 which was removed in 1.9. Please see the following on how to migrate your configuration - https://sparklabs.com/support/kb/articl ... envpn-2-4/
Regards,
Eric
It looks like you are using OpenVPN 2.3 on Viscosity 1.8 which was removed in 1.9. Please see the following on how to migrate your configuration - https://sparklabs.com/support/kb/articl ... envpn-2-4/
Regards,
Eric
Eric Thorpe
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
Viscosity Developer
Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
- Posts: 2
- Joined: Thu Dec 31, 2020 6:54 pm
Thank you for your detailed answser.
Xavier
Xavier
3 posts
Page 1 of 1