Page 2 of 2

Re: Split DNS broken with 1.7.3?

Posted: Thu Apr 08, 2021 11:31 pm
by chris_childerhose
Hi Eric,

Yeah, I can use nslookup and ping to reach the server just that the connection log shows this same message from the earlier version this post was created for.

I will gather logs and send them off via email versus posting here.

Re: Split DNS broken with 1.7.3?

Posted: Tue Apr 20, 2021 12:13 am
by chris_childerhose
Something I found with this issue - the newer adapter seems to show these messages while the older Legacy adapter does not. Maybe something to look into.

Re: Split DNS broken with 1.7.3?

Posted: Tue Apr 20, 2021 4:37 pm
by Eric
Hi Chris,

This is happening because the new adapter can setup much faster. As the adapter is setup before routes are, there is a brief period where the DNS is not reachable if you need a route added to access the DNS server via the VPN. As was shown in the logs you emailed us, after the routes come up, the log is updated to reflect the DNS server is in use and reachable.

We'll see if we can do something to prevent this message as it can be a bit misleading if the entire log isn't taken into account.

Regards,
Eric