Search found 5 matches

Search found 5 matches Page 1 of 1
by wpn
Thu Dec 02, 2021 3:45 am
Forum: Viscosity Support (Mac Version)
Topic: Viscosity connects, no ping to destination
Replies: 4
Views: 4823

Hello James, thanks for all your support! I found the culprit: It was the Synology. The hook for Allow clients to access server's LAN does not have any effect except you reboot the Synology. In addition, this option does not lead to the same behavior with different computers. On my Mac from an inter...
by wpn
Wed Dec 01, 2021 7:00 am
Forum: Viscosity Support (Mac Version)
Topic: Viscosity connects, no ping to destination
Replies: 4
Views: 4823

Hi James, thank you very much for your answer! I tried the 10.8.0.1 address - and it works fine. I also made the verbose log as you suggested. In addition, I went through the manuals you linked. But it seems everything as you describe in there. The one thing I see is some TLS certificate stuff. Can ...
by wpn
Tue Nov 30, 2021 7:12 am
Forum: Viscosity Support (Mac Version)
Topic: Viscosity connects, no ping to destination
Replies: 4
Views: 4823

Hello, try to connect from a DS lite line (only IP v6) to a Synology OpenVPN server on a classic IP v4 and v6 internet connection. The problem is that the connection is possible but there is no connection (and no ping) to the Synology (192.168.178.5). I think there might be a problem with the routes...
by wpn
Mon Feb 08, 2021 5:08 am
Forum: Viscosity Support (Mac Version)
Topic: OpenVPN connection possible although old IPv6 prefix
Replies: 2
Views: 3927

Hello James, thank you very much for your extensive answer! Much appreciated. As the posted configuration is still working after over a week you might be right that it is enough that the Synology (and therefor its OpenVPN server) is reachable with a current IPv6 address. The client (Viscosity) seems...
by wpn
Thu Jan 28, 2021 11:52 pm
Forum: Viscosity Support (Mac Version)
Topic: OpenVPN connection possible although old IPv6 prefix
Replies: 2
Views: 3927

Hello, I have a technical question although everything is working fine :) The setup is the following: My Synology with OpenVPN server is behind a FritzBox with IPv6 connection. I can connect via Viscosity, port 1194 is open, everything is running smoothly. As DDNS service I use the Synology one. Now...
Search found 5 matches Page 1 of 1