SparkLabs Forum.

Community Help.


Ping OK but not connect with server web

Hi,

I install the viscosity in my Windows 10 , all ok but the problem is no possible connect with the server.

The server is OPEN VPN Server in PFsense , all ok

The ip locally is 192.168.5.x

The ip remote of Open VPN is 192.168.10.2 ( when connect with Viscosity assihn this ip)

In the remote if ping to the 192.168.10.2 the ping respond.

In the client viscosity is possible enter in the server ( NAS, Router, ping , all)

The problem is reverse if the server or other client VPN enter to the 192.168.10.2 , not is possible entre (i Install IP Cam server), the ping respond.

The firewall in the Windows 10 on installed viscosity is desactivated, and the connection is marked to routed by tunnel.

Any idea.
Hi arenillense,

The only thing to check on the client is that routing is setup correctly - http://sparklabs.com/support/kb/article ... ng-problem

If routing is setup correctly, this seems like a setup or NAT issue on pfsense applicance.

Regards,
Eric
is correct?


IPv4 Tabla de enrutamiento
===========================================================================
Rutas activas:
Destino de red Máscara de red Puerta de enlace Interfaz Métrica
0.0.0.0 0.0.0.0 192.168.0.1 192.168.0.10 291
0.0.0.0 128.0.0.0 192.168.10.1 192.168.10.2 1
8.46.174.2 255.255.255.255 192.168.0.1 192.168.0.10 35
127.0.0.0 255.0.0.0 En vínculo 127.0.0.1 331
127.0.0.1 255.255.255.255 En vínculo 127.0.0.1 331
127.255.255.255 255.255.255.255 En vínculo 127.0.0.1 331
128.0.0.0 128.0.0.0 192.168.10.1 192.168.10.2 1
192.168.0.0 255.255.0.0 En vínculo 192.168.0.10 291
192.168.0.10 255.255.255.255 En vínculo 192.168.0.10 291
192.168.5.0 255.255.255.0 192.168.10.1 192.168.10.2 1
192.168.10.0 255.255.255.0 En vínculo 192.168.10.2 257
192.168.10.2 255.255.255.255 En vínculo 192.168.10.2 257
192.168.10.255 255.255.255.255 En vínculo 192.168.10.2 257
192.168.255.255 255.255.255.255 En vínculo 192.168.0.10 291
224.0.0.0 240.0.0.0 En vínculo 127.0.0.1 331
224.0.0.0 240.0.0.0 En vínculo 192.168.0.10 291
224.0.0.0 240.0.0.0 En vínculo 192.168.10.2 257
255.255.255.255 255.255.255.255 En vínculo 127.0.0.1 331
255.255.255.255 255.255.255.255 En vínculo 192.168.0.10 291
255.255.255.255 255.255.255.255 En vínculo 192.168.10.2 257
===========================================================================
Rutas persistentes:
Dirección de red Máscara de red Dirección de puerta de enlace Métrica
0.0.0.0 0.0.0.0 192.168.0.1 Predeterminada
Hi arenillense,

This indicates that all traffic is being routed through the VPN.

Regards,
Eric
4 posts Page 1 of 1

Copyright © 2016 SparkLabs Pty Ltd. All Rights Reserved. Privacy Policy