roaming vpn profile

Got a problem with Viscosity or need help? Ask here!

jcg

Posts: 5
Joined: Sat Jan 18, 2014 5:23 am

Post by jcg » Mon May 25, 2015 4:32 am
Hi,, we have got a roaming user profile setup here..

Tried everything on setting up VPN yet the error logs does not indicate much .. anyhelp on the matter will help

May 24 9:38:04 PM: State changed to Connecting
May 24 9:38:05 PM: Viscosity Windows 1.5.6 (1340)
May 24 9:38:05 PM: Running on Microsoft Windows 7 Professional
May 24 9:38:05 PM: No associated network adapter was found, creating one. This process may take up to a minute or two.
May 24 9:38:05 PM: State changed to Creating...
May 24 9:38:05 PM: Failed to create adapter.
May 24 9:38:05 PM: Network adapter created. Proceeding with connection attempt
May 24 9:38:05 PM: State changed to Connecting
May 24 9:38:05 PM: Bringing up interface...
May 24 9:38:05 PM: A dev-node for this connection was not found in the configuration file. Viscosity will attempt to connect without one.
May 24 9:38:05 PM: Checking reachability status of connection...
May 24 9:38:05 PM: Connection is reachable. Starting connection attempt.
May 24 9:38:05 PM: OpenVPN 2.3.6 Windows-MSVC [SSL (OpenSSL)] [LZO] [PKCS11] [IPv6] built on Apr 13 2015
May 24 9:38:05 PM: library versions: OpenSSL 1.0.2a 19 Mar 2015, LZO 2.09
May 24 9:38:14 PM: Control Channel Authentication: using 'C:\Program Files\Common Files\Viscosity\OpenVPNConfig\onesupport\1\ta.key' as a OpenVPN static key file
May 24 9:38:14 PM: UDPv4 link local: [undef]
May 24 9:38:14 PM: UDPv4 link remote: [AF_INET]46.30.208.129:1202
May 24 9:38:14 PM: WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
May 24 9:38:17 PM: [server] Peer Connection Initiated with [AF_INET]46.30.208.129:1202
May 24 9:38:20 PM: do_ifconfig, tt->ipv6=0, tt->did_ifconfig_ipv6_setup=0
May 24 9:38:20 PM: State changed to Disconnected

Eric

User avatar
Posts: 1146
Joined: Sun Jan 03, 2010 3:27 am

Post by Eric » Mon May 25, 2015 9:32 am
Hi jcg,

Do you get this every time you attempt to connect?
May 24 9:38:05 PM: No associated network adapter was found, creating one. This process may take up to a minute or two.
May 24 9:38:05 PM: State changed to Creating...
May 24 9:38:05 PM: Failed to create adapter.
Regards,
Eric
Eric Thorpe
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs

jcg

Posts: 5
Joined: Sat Jan 18, 2014 5:23 am

Post by jcg » Thu May 28, 2015 3:43 am
Hey Eric,

yes,and it looks like the adpater was disabled and had to renaable it. Also any reason why when the roaming user logs in again.. the connection profile disappears. and they have to reimport it.

Eric

User avatar
Posts: 1146
Joined: Sun Jan 03, 2010 3:27 am

Post by Eric » Wed Jun 03, 2015 2:26 pm
Hi jcg,

Most likely what is happening is your Roaming Profile is overwriting the config each time the user logs in, or intermittently. This will be removing the adapter GUID from the config or modifying it to whatever is in the config in the users roaming cache on the network. If there are no configs in the network cache for this users roaming profile, it will be removing the config. I would highly recommend switching to Single Adapter Mode to relieve the adapter issue you are facing, or removing %appdata%\Viscosity from your Roaming Profiles control.

http://www.sparklabs.com/support/single ... de_windows

Regards,
Eric
Eric Thorpe
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
4 posts Page 1 of 1