Routing problem: non-VPN IPs work on router, not elsewhere

Got a problem with Viscosity or need help? Ask here!

psonice

Posts: 2
Joined: Wed Jan 18, 2017 7:21 am

Post by psonice » Wed Jan 18, 2017 7:26 am
I need to route certain IP ranges so they're not sent over the VPN. To do so, I've unticked "Send all traffic over VPN", and added a route in the Networking panel set to net_gateway.

This seems to work fine on the mac I'm using as a router (which is sharing a WiFI connection to Ethernet). Opening a website on one of the ranges now works fine, and checking the route for that site show's it's routed via en1 and not tun.

However, the rest of the machines on the network still seem to be routing via the VPN, and can't access the site.

Any clues would be very welcome :)

James

User avatar
Posts: 2313
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Wed Jan 18, 2017 2:02 pm
Hi psonice,

This is outside the scope of Viscosity, so I'm afraid it's not something we can offer direct support for. However it sounds like you'll need to adjust the NAT rules on your computer to exclude the traffic.

Cheers,
James
Web: https://www.sparklabs.com
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs

psonice

Posts: 2
Joined: Wed Jan 18, 2017 7:21 am

Post by psonice » Wed Jan 18, 2017 8:29 pm
Thanks - thought it was probably a Viscosity setting I was missing, so this is probably the clue I need to get back on the right track.
3 posts Page 1 of 1