Skip to content
Viscosity & Netflix Routing
Got a problem with Viscosity or need help? Ask here!
Hi there,
I'm trying to allow netflix to bypass the VPN, and I've read the support article here (https://www.sparklabs.com/support/kb/ar ... lications/) However I haven't been able to figure it out. Where do i put in all of these values?
# netflix
route 108.175.32.0 255.255.240.0 vpn_gateway
route 208.75.76.0 255.255.252.0 vpn_gateway
route 64.212.0.0 255.252.0.0 vpn_gateway
route 199.92.0.0 255.252.0.0 vpn_gateway
route 206.32.0.0 255.252.0.0 vpn_gateway
route 209.244.0.0 255.252.0.0 vpn_gateway
route 68.142.64.0 255.255.192.0 vpn_gateway
route 69.28.128.0 255.255.192.0 vpn_gateway
route 69.164.0.0 255.255.192.0 vpn_gateway
route 208.111.128.0 255.255.192.0 vpn_gateway
route 128.242.0.0 255.255.0.0 vpn_gateway
route 204.0.0.0 255.252.0.0 vpn_gateway
route 204.141.0.0 255.255.0.0 vpn_gateway
route 204.200.0.0 255.252.0.0 vpn_gateway
route 208.44.0.0 255.252.0.0 vpn_gateway
I'm trying to allow netflix to bypass the VPN, and I've read the support article here (https://www.sparklabs.com/support/kb/ar ... lications/) However I haven't been able to figure it out. Where do i put in all of these values?
# netflix
route 108.175.32.0 255.255.240.0 vpn_gateway
route 208.75.76.0 255.255.252.0 vpn_gateway
route 64.212.0.0 255.252.0.0 vpn_gateway
route 199.92.0.0 255.252.0.0 vpn_gateway
route 206.32.0.0 255.252.0.0 vpn_gateway
route 209.244.0.0 255.252.0.0 vpn_gateway
route 68.142.64.0 255.255.192.0 vpn_gateway
route 69.28.128.0 255.255.192.0 vpn_gateway
route 69.164.0.0 255.255.192.0 vpn_gateway
route 208.111.128.0 255.255.192.0 vpn_gateway
route 128.242.0.0 255.255.0.0 vpn_gateway
route 204.0.0.0 255.252.0.0 vpn_gateway
route 204.141.0.0 255.255.0.0 vpn_gateway
route 204.200.0.0 255.252.0.0 vpn_gateway
route 208.44.0.0 255.252.0.0 vpn_gateway
Hi simmrl,
You can enter the routes manually under the Networking tab when editing your connection. For example, for the first route the Destination is 108.175.32.0, the Mask is "255.255.240.0", and the Gateway is VPN Gateway. The full steps for this can be found at:
https://www.sparklabs.com/support/kb/ar ... connection
Alternatively you can copy paste the commands into the Advanced commands area (under the Advanced tab when editing your connection in Viscosity).
Cheers,
James
You can enter the routes manually under the Networking tab when editing your connection. For example, for the first route the Destination is 108.175.32.0, the Mask is "255.255.240.0", and the Gateway is VPN Gateway. The full steps for this can be found at:
https://www.sparklabs.com/support/kb/ar ... connection
Alternatively you can copy paste the commands into the Advanced commands area (under the Advanced tab when editing your connection in Viscosity).
Cheers,
James
Web: https://www.sparklabs.com
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
2 posts
Page 1 of 1